This feature is available from KeexyBox 20.10.1
KeexyBox can provide a Wi-Fi Access Point. It use hostapd to provide the service. This page allows you to setup the Access Point.
Steps before configuring Access Point :
Notes when enabling Wi-Fi Access Point:
br0
will be created. This interface will be use for Input and Output networks.To setup the Wi-Fi Access Point:
System settings → Wi-Fi Access Point
.Wi-Fi Access Point settings
page.Save
to save settings otherwise click on Cancel
. You will need to reload hostapd service or reboot KeexyBox for the configuration to take effect.Wi-Fi Access Point settings :
Field | Description |
---|---|
Enable Access Point | Enable or disable Wi-Fi Access Point. |
General | |
SSID | The name of the Wi-Fi Network. |
Channel | Channel number to use. To be changed to avoid interference. |
Operation mode | Bandwidth (speed) that the bands provide. |
Enable Wi-Fi Multimedia | When enabled it provide a quality of service for multimedia trafic. |
Bridge | |
Wi-Fi Interface | The wireless interface to use the bridge. |
Wired Interface | The wired interface to use the bridge.. |
Security | |
Hide Access Point | Hide or show SSID. |
Clients Isolation | . |
Enable Authentication | Enable or disable authentication to connect to Wi-Fi network. |
Passphrase | Wi-Fi Password if authentication is enabled. |
Get more information at : https://w1.fi/cgit/hostap/plain/hostapd/hostapd.conf
About KeexyBox Project: